How much do spoons and spinners cost from China?

Our sample of 6 listings spans US$0.31 to US$6.00. That is the widest spread of any type in our catalogue, and most of it is not quality - two of the six rows are priced per bag rather than per piece, and the cheapest row buys a simple rotating spoon while the dearest buys a bionic spoon in seven colours.

Why is there such a price range for what looks like the same lure?

Three reasons in our own sample: the body material (zinc alloy, lead or composite), the number of colourways in the pack, and whether the printed unit is a piece or a bag. A per-bag price on a 7-colour assortment is not comparable to a per-piece price on a single spoon, and treating them as comparable is the most common mistake in this type.

What is the MOQ for spinners and spoons from China?

50 to 500 pieces in our sample. The 50-piece floor sits on a per-bag assortment; the 500-piece floor sits on a simple rotating spoon. As with hooks, the low MOQ and the low unit price are usually on different rows.

What is the difference between a spoon and a spinner?

A spoon is a single metal body that wobbles; a spinner has a blade that rotates around a wire form, often with a body and a weight in the middle. Commercially the difference matters because a spinner is an assembly - blade, wire, body, hook and dressing - while a spoon is a stamping with a hook. They are different quotations.

What should I specify so two batches behave the same?

Blade thickness and blade finish. Vibration is the product, and thickness is what sets it. A blade that varies by a fraction of a millimetre vibrates differently, and the sample will always look right - which is why the field belongs in the specification rather than in the sample approval.

Can I get custom colours on a spoon or spinner?

On the blade and the body, yes - paint and holographic finishes are process steps rather than tooling. On the stamped blade shape itself, only if you are paying for a die. Ask which of the two the factory is quoting before you commit to a colour range.

Are these lures suitable for saltwater?

Only with a named corrosion standard. Blade, wire form and hook are three different metals in one product, and the weakest one decides the claim. An order that states a salt-spray standard and the hours can support the claim; one that does not, cannot.

How do I compare a per-bag quotation with a per-piece one?

Convert first, then compare. Ask for the count per bag in writing, divide, and only then put the numbers side by side. In our own sample the two per-bag rows sit at the top of the price range on the per-bag figure alone - which is exactly the reading a buyer should not act on.

Spoons and spinners from China: the widest unit-price spread in our sample

Direct answer

Six sampled listings run US$0.31-6.00, a 19x spread. Blade shape and whether the lure is sold by the piece or the bag explain most of it. Our spoon and spinner sample holds 6 listings from US$0.31 to US$6.00 - the widest spread of any type in the catalogue. MOQ runs from 50 to 500 pieces across the same six listings.

Key facts

Our spoon and spinner sample holds 6 listings from US$0.31 to US$6.00 - the widest spread of any type in the catalogue.
MOQ runs from 50 to 500 pieces across the same six listings.
Two listings are priced per bag rather than per piece, which is most of the apparent spread at the top of the range.
The sample includes a weed-guard spinner, a rotating-sequence spoon, a bionic spoon, a spinnerbait and a 32mm ultra-light sequin.
Spinners and spoons share a metal blade, a wire form and a hook - three parts from potentially three different suppliers.

Spoons and spinners look like the simplest thing in a tackle catalogue and behave like the most confusing. Our sample of six listings runs from US$0.31 to US$6.00 - a nineteen-fold spread inside one type. Once the per-bag rows are converted, most of the mystery goes away: what is left is the body material, the number of colourways, and whether the lure is a single stamping or an assembly of blade, wire, body, hook and dressing.

That last distinction is the commercial one. A spoon is a piece of stamped metal with a hook on it. A spinner is four parts from up to three suppliers, joined at a per-piece price point where the labour is a real line. A buyer who knows which one they are ordering can say what they are paying for; a buyer who orders 'spinners' will get whichever of the two the factory finds easier to quote.

Our spoon and spinner sample holds 6 listings from US$0.31 to US$6.00 - the widest spread of any type in the catalogue.
MOQ runs from 50 to 500 pieces across the same six listings.
Two listings are priced per bag rather than per piece, which is most of the apparent spread at the top of the range.
The sample includes a weed-guard spinner, a rotating-sequence spoon, a bionic spoon, a spinnerbait and a 32mm ultra-light sequin.
Spinners and spoons share a metal blade, a wire form and a hook - three parts from potentially three different suppliers.
Blade thickness and finish are the two fields that decide whether a delivery vibrates like the approved sample.

What moves the unit price

For a bladed lure, most of the price is in the metal and in the assembly.
Cost driver	Why it moves the price	How to control it in the order
Body material	Lead, zinc alloy and brass are three different commodity prices for the same silhouette.	Name the material and quote two of them. The difference is visible immediately.
Blade stamping and finish	Thickness tolerance and finish are separate operations; a holographic finish is its own step.	Name the thickness band, and quote the finish as its own line.
Per-piece against per-bag pricing	Two rows in our sample are priced per bag. A per-bag price compared against a per-piece price is the single most common comparison error in this type.	Convert everything to a per-piece figure before comparing. Ask for the count per bag in writing.
Assembly	Blade, body, hook and dressing have to be joined; the labour is at a low per-piece value.	Ask for the price assembled and unassembled. The gap tells you what the labour actually costs.
Hook choice	A dressed single and a treble are different costs and different tooling.	State the hook pattern rather than letting the factory choose.

What the six sampled spoons and spinners cost

Reference bands as published on each listing, with the printed unit kept exactly as our sample states it - because two of these rows are not priced per piece.
Sampled form	Reference price	MOQ
Rotating-sequence spoon, 3-36g	US$0.31-0.82 / piece	500 pieces
Ultra-light 32mm reflective spoon	US$1.30-1.40 / piece	200 pieces
Weed-guard splash spinner, 7-11g	US$1.25-1.79 / piece	100 pieces
Long-distance rotating composite	US$1.12 / piece	100 pieces
High-speed composite spinnerbait, 7-14g	US$1.25 / bag	100 bags
Bionic spoon, 8g, 7 colours	US$2.00-6.00 / bag	50 bags

Three parts, three possible suppliers

A spinner is closer to an assembly than to a lure - which is why the bill of materials decides the price.
Part	Function	Who makes it
Blade	Produces the flash and the vibration; thickness sets the frequency	Metal stamping
Body, weight and wire form	Carries the mass and holds the blade off-centre	Lead caster or lure factory
Hook	Usually a treble or a dressed single	Hook factory
Skirt, dressing or beads	Silhouette and colour; often hand-fitted	Accessory or skirt supplier

Questions buyers ask about spoons and spinners from china: the widest unit-price spread in our sample

Each question has its own page, so it can be found and cited on its own.

How much do spoons and spinners cost from China?Our sample of 6 listings spans US$0.31 to US$6.00.
Why is there such a price range for what looks like the same lure?Three reasons in our own sample: the body material (zinc alloy, lead or composite), the number of colourways in the pack, and whether the printed unit is a piece or a bag.
What is the MOQ for spinners and spoons from China?50 to 500 pieces in our sample.
What is the difference between a spoon and a spinner?A spoon is a single metal body that wobbles; a spinner has a blade that rotates around a wire form, often with a body and a weight in the middle.
What should I specify so two batches behave the same?Blade thickness and blade finish.
Can I get custom colours on a spoon or spinner?On the blade and the body, yes - paint and holographic finishes are process steps rather than tooling.
Are these lures suitable for saltwater?Only with a named corrosion standard.
How do I compare a per-bag quotation with a per-piece one?Convert first, then compare.

What to send for a comparable quote

Fields a factory needs before the answer is a quotation rather than a guess.
Field	Why it changes the price
Blade shape and thickness	The two fields that decide vibration; thickness is the one that drifts between batches
Blade finish	Polished, painted, hammered or holographic - separate process steps
Total weight in grams	Sets casting distance and depth; state the range the listing carries
Body material	Lead, zinc alloy, brass or ABS - different casters and different unit prices
Hook specification	Pattern, gauge and whether it is dressed
Wire form gauge	Decides whether the lure survives a snag and whether the blade stays in tune
Skirt or dressing	Colour, length and attachment
Sold by piece or by bag	State it. Two of our six sampled rows are per-bag prices
Pieces per bag	The count that converts a per-bag price into a per-piece price
Private label or stock	Tooling cost and lead time; blade stamping is often a stock tool

What to agree in writing, and the tolerance to name

On a vibrating lure the tolerance is the product. Two of these five are invisible on a sample.
Field	What the order has to state	Tolerance or standard to name
Blade thickness	The thickness and the shape template	Name the band in mm; a thin blade changes the frequency
Weight	Total weight in grams, and whether the hook is included in the figure	Name the band and say what it includes - weighing with and without the hook gives two different numbers
Wire form gauge	The wire diameter	Name the gauge; it decides whether the lure survives a snag
Hook gauge and point	Pattern, gauge and point form	Name all three; never a durability adjective
Salt-spray hours	The corrosion standard for blade, wire and hook	Name the standard and the hours, or the saltwater claim is unenforceable

What we have not verified

We hold no measured vibration or blade-frequency data for any lure in this sample.
Unit volumes by market: none published.
Prices and MOQ are from our sampled listings; material and process statements are general and checkable, not measurements we took.

Buy by product type

The same decision written for each type in the catalogue. This page is Spoon & Spinner.

The sampled listings behind this page are in the catalogue: every spoon & spinner we have sampled, with the reference price and MOQ on each listing.

Where this record leads

Sampled spoons and spinners listings - reference prices and MOQ per listing.
Specification builder - turn these fields into a spec sheet you can send.
Reference price bands - the band this record sits in, with its unit stated.
The sourcing playbook - the process these questions sit inside.
US and EU compliance - what has to be true before the shipment clears.

Send a specification All briefs

Sources 5 cited

Our sampled spoon and spinner listings with unit price, MOQ and printed unit per listing - aggregated at build time internal record
Rapala's CrushCity leads ICAST award winners, Angling International, 2026-07-16 - the blade and skirt category in the 2026 award list
ChatterBait Elite EVO HD, Z-Man Fishing Products - an example of how a bladed lure is specified by its maker
UN Comtrade — China export statistics under HS 9507, 2023-2024 (retrieved from the official API)
Harmonized System heading 9507 (rods, hooks, reels, lures) — US HTS lookup

Every figure on this page traces to one of these. The same list is declared in the page structured data (schema.org citation) and in the Markdown twin.