# Octopus skirt trolling lures: Kona heads and speed windows

> Skirt length and strand style, resin against lead heads, and the trolling speed each head is built for.

Source: https://luressource.com/opportunities/octopus-skirt-trolling-lures/

Direct answer. Skirt length and strand style, resin against lead heads, and the trolling speed each head is built for. The dished-out Hawaiian head shape was first called a conventional head before someone coined the name Kona head; the original Kona leader hole sat below centre in the front dish and centred at the back, and those Hawaiian lures were trolled at 4 to 6 knots (InTheBite). Later head shapes and face angles opened a trolling band of 7 to 15 knots, and the tuning note for a slant head is 8 knots with a pop and splash every 5 to 8 seconds (InTheBite). Key facts. 1) The dished-out Hawaiian head shape was first called a conventional head before someone coined the name Kona head; the original Kona leader hole sat below centre in the front dish and centred at the back, and those Hawaiian lures were trolled at 4 to 6 knots (InTheBite). 2) Later head shapes and face angles opened a trolling band of 7 to 15 knots, and the tuning note for a slant head is 8 knots with a pop and splash every 5 to 8 seconds (InTheBite). 3) The Kona head is a scooped nose with an offset pulling point, described as a wild lure that will not sit still and tends to duck aside as a fish closes its mouth; Sevenstrand began making them in bulk in the 1970s (FishTrack). 4) Retail skirt guidance matches 8 to 9 inch skirts to ballyhoo and schoolie mahi rigs and 13 to 14 inch skirts to large marlin and tuna lures, sells replacement skirts across a 4.5 to 14 inch range, and describes octopus strands as thicker and pulsing at 6 to 8 knots against slimmer squid skirts that track straighter when speed rises (Tackle Room). 5) A published lead bullet trolling lure carries its weight in the metal at 13 oz with a 9 inch skirt and 25 oz with a 14 inch skirt, is sold lure-only or cable-rigged with double hooksets, and ships with a California lead exposure warning (Fathom Offshore). Octopus skirt trolling lures: Kona heads and speed windows Direct answer Skirt length and strand style, resin against lead heads, and the trolling speed each head is built for. The dished-out Hawaiian head shape was first called a conventional head before someone coined the name Kona head; the original Kona leader hole sat below centre in the front dish and centred at the back, and those Hawaiian lures were trolled at 4 to 6 knots (InTheBite). Later head shapes and face angles opened a trolling band of 7 to 15 knots, and the tuning note for a slant head is 8 knots with a pop and splash every 5 to 8 seconds (InTheBite). Key facts The dished-out Hawaiian head shape was first called a conventional head before someone coined the name Kona head; the original Kona leader hole sat below centre in the front dish and centred at the back, and those Hawaiian lures were trolled at 4 to 6 knots (InTheBite). Later head shapes and face angles opened a trolling band of 7 to 15 knots, and the tuning note for a slant head is 8 knots with a pop and splash every 5 to 8 seconds (InTheBite). The Kona head is a scooped nose with an offset pulling point, described as a wild lure that will not sit still and tends to duck aside as a fish closes its mouth; Sevenstrand began making them in bulk in the 1970s (FishTrack). Retail skirt guidance matches 8 to 9 inch skirts to ballyhoo and schoolie mahi rigs and 13 to 14 inch skirts to large marlin and tuna lures, sells replacement skirts across a 4.5 to 14 inch range, and describes octopus strands as thicker and pulsing at 6 to 8 knots against slimmer squid skirts that track straighter when speed rises (Tackle Room). A published lead bullet trolling lure carries its weight in the metal at 13 oz with a 9 inch skirt and 25 oz with a 14 inch skirt, is sold lure-only or cable-rigged with double hooksets, and ships with a California lead exposure warning (Fathom Offshore). An octopus skirt trolling lure is a head, a collar and a bundle of plastic strands, and the strands are the part that has to be sold as numbers. Published guidance ties skirt length to the rig - eight to nine inches for ballyhoo and schoolie mahi, thirteen to fourteen for large marlin and tuna - and ties strand style to speed, with thicker octopus strands pulsing at six to eight knots while slimmer squid skirts track straighter when the boat is pushed. The Kona head sits at the wandering end of that family: a scooped nose with an offset pulling point that will not sit still. The sourcing consequence is that head material is the field that decides the quote. A hand-poured resin head is labour and finishing; a lead head is metal weight, freight weight and, in some markets, a warning label; a soft injection-moulded head is the cheapest of the three and is priced accordingly. For this family our sampled listings quote US$0.08 to US$2.80 per piece at MOQ 100 to 2,000 pieces, a factory price basis, and the sample includes a resin-head Kona, so a buyer can compare a poured head against a PVC skirted bait inside our own data. The dished-out Hawaiian head shape was first called a conventional head before someone coined the name Kona head; the original Kona leader hole sat below centre in the front dish and centred at the back, and those Hawaiian lures were trolled at 4 to 6 knots (InTheBite). Later head shapes and face angles opened a trolling band of 7 to 15 knots, and the tuning note for a slant head is 8 knots with a pop and splash every 5 to 8 seconds (InTheBite). The Kona head is a scooped nose with an offset pulling point, described as a wild lure that will not sit still and tends to duck aside as a fish closes its mouth; Sevenstrand began making them in bulk in the 1970s (FishTrack). Retail skirt guidance matches 8 to 9 inch skirts to ballyhoo and schoolie mahi rigs and 13 to 14 inch skirts to large marlin and tuna lures, sells replacement skirts across a 4.5 to 14 inch range, and describes octopus strands as thicker and pulsing at 6 to 8 knots against slimmer squid skirts that track straighter when speed rises (Tackle Room). A published lead bullet trolling lure carries its weight in the metal at 13 oz with a 9 inch skirt and 25 oz with a 14 inch skirt, is sold lure-only or cable-rigged with double hooksets, and ships with a California lead exposure warning (Fathom Offshore). For this family our sampled listings quote US$0.08 to US$2.80 per piece at MOQ 100 to 2,000 pieces - a factory price basis, not a retail price - and the three Octopus Skirt listings in the sample include a resin-head Kona. Skirt length and the rig it is matched to Published retail guidance ties skirt length to the rig rather than to the fish, so length is a specification and not a style note. Skirt length Matched to What it changes in the order 8 to 9 inch Ballyhoo rigs and schoolie mahi, the usual starting size in retail guidance (Tackle Room) Collar diameter and the hook size the skirt has to cover, plus how much skirt material each lure uses 13 to 14 inch Large marlin and tuna lures, matched to heavy hook sets and bigger bait profiles (Tackle Room) Longer strands mean more material per lure, a larger head collar and a bulkier export carton Replacement packs, 4.5 to 14 inch Spare skirts bought on their own to re-dress a head after a bite or a wahoo slash (Tackle Room) A separate SKU whose variables are colour count, strand style and pack count rather than head tooling Head material: resin, lead or soft plastic Head material is the field that decides both the quote and the shelf life of the listing. Head material Behaviour What it changes in the order Resin, hand poured Holds a sharp face and paint detail, but the leading edge of a resin head chips if it is handled carelessly (FishTrack) Pouring and finishing labour, colour batches, and any keel weighting or jet tubes set inside the head Lead The weight is the metal itself: a published lead bullet runs fast and straight just under the surface for wahoo and tuna (Fathom Offshore) Metal cost and freight weight, plus a lead exposure warning label that some markets require Soft plastic Injection-moulded soft heads give a squishy feel on the bite and cost less than custom-built lures (FishTrack) Moulding instead of pouring, a lower unit cost, and a different story to tell on durability Trolling speed windows The window is set by the head, the weight and the skirt together, which is why it belongs on the specification sheet. Speed window What runs there What it demands of the head and skirt 4 to 6 knots The original Hawaiian Kona heads, whose leader hole sat below centre at the front (InTheBite) A head that still works at low speed; the offset pulling point is what makes it wander and duck 6 to 8 knots Octopus skirts, whose thicker strands pulse at this speed (Tackle Room) Strand weight and skirt length do the work, so the head tooling itself can stay relatively simple 7 to 15 knots Modern head shapes and face angles opened this band; a slant head tuned at 8 knots pops every 5 to 8 seconds (InTheBite) A weighted, keel-balanced head that tracks straight and a skirt that will not blow out or tangle Which channel buys which format The same lure is three different products depending on what is printed on the pack and how it arrives rigged. Channel Format it buys What it demands E-commerce and mass retail Single lures and small replacement skirt packs in one or two colours Skirt length and colour named on the pack, a low unit cost, and a barcode that matches the carton marks Specialist tackle and big-game dealers Complete lures with a named head material, skirt length and rigging option A continuous size ladder, a stated head weight, and the lure-only or rigged choice priced as separate SKUs Boat and charter supply Bulk replacement skirts and spare heads in the colours the spread already runs Durability across a season, because a torn skirt is what forces a charter boat to reorder mid-season Questions buyers ask about octopus skirt trolling lures: kona heads and speed windows Each question has its own page, so it can be found and cited on its own. What is a Kona head, and why does it matter on an octopus skirt lure? The name comes from Hawaii. Which skirt length should a buyer stock? Published retail guidance ties skirt length to the rig rather than to the fish. How do strand style and strand count change the lure? Strand style is a speed decision. Should the head be resin or lead? They do different jobs. What trolling speeds should the product be sold for? Speeds in the published sources come in bands. Who actually buys skirted trolling lures, and how? Three buyer types, and they buy differently. How is an octopus skirt trolling lure priced from a Chinese factory? For this family our sampled listings quote US$0.08 to US$2.80 per piece at MOQ 100 to 2,000 pieces, which is a factory price basis and not a retail price. How should skirt durability be specified on an order? Specify material and strand geometry rather than a claim. What to send for a comparable quote Fields a factory needs before the answer is a quotation rather than a guess. Field Why it changes the price Skirt length in inches The first size axis in the family, and the field that decides how much skirt material and how large a head collar a lure needs Head material Hand-poured resin, cast lead and injected soft plastic are three different processes, so the material is the quote before any dimension is discussed Head weight in grams or ounces A lead head is priced by metal weight, so a 13 oz head and a 25 oz head are different material costs and different freight Head shape and face angle Kona scoop, cup face, slant and bullet heads come from different moulds and each one owns a different trolling speed window Keel weighting and leader tube An internal weight and an offset or centred leader hole are extra components and extra assembly inside the head Skirt material Vinyl panels are hand-fitted while silicone is the current default, so the material sets both the labour and the surface texture Strand count and fringe width More strands and finer fringe mean more material and more cutting and assembly time per lure Colour count per head Every colourway is its own pour or cast batch and its own minimum, so the colour card is a direct cost line Jet holes Jetted heads run four to six tubes through the head, which is a separate drilling operation and a separate tooling step Rigging option Lure-only against supplied with cable and hooks doubles the SKU count and adds crimping labour and hardware cost Pack format and order quantity Single lure, replacement skirt pack or bulk carton, quoted FOB or EXW at a stated run size and MOQ What we have not verified Retail prices for skirted trolling lures: we publish no retail price survey, so no margin table appears here and any retail figure belongs to the listing that showed it. Market size and unit volumes: no sourced figure for skirted trolling lures was found, and none is invented here. Head weight against trolling speed: we publish no test data linking a head weight to a speed, only the speed bands named in the cited guides. Lead warning and restriction rules by market: labelling and restriction differ by jurisdiction, and the buyer's customs broker decides the classification. Catch performance and skirt shelf life: published maintenance advice describes plasticiser oils migrating out of plastic skirts over time, but we publish no shelf-life test, and no test data supports a claim that one skirt length, strand count or colour outfishes another. Where this record leads Sampled octopus skirt listings - reference prices and MOQ per listing. Specification builder - turn these fields into a spec sheet you can send. Reference price bands - the band this record sits in, with its unit stated. The sourcing playbook - the process these questions sit inside. US and EU compliance - what has to be true before the shipment clears. Send a specification All briefs Sources Slant vs. Cupped Head Lures: Action Makes the Difference, InTheBite - Kona head origin, 4 to 6 knot Hawaiian speeds and the 7 to 15 knot band Anatomy of a Trolling Lure, FishTrack - Kona head shape and behaviour, resin against soft heads, jets and inserts Vinyl Revival, FishTrack - skirting a trolling lure, vinyl against silicone, fringe width and trimming Fishing Lure Skirts, Tackle Room - 8 to 9 inch and 13 to 14 inch skirt matching, octopus against squid strands, 6 to 8 knot pulsing Fatboy Lead Bullet Trolling Lure, Fathom Offshore - 13 oz and 25 oz lead heads, 9 inch and 14 inch builds, rigging options and lead warning Octopus Skirt price band and MOQ range quoted from our own sampled listings at /products/ Where to next Product catalogue Sample listings with price per unit Verified directory Factories that passed 4 verification gates How sourcing works Six steps, timing, failure modes Price benchmark Reference bands and MOQ tiers Opportunities · Octopus Skirt All briefs (11) →