# Dual-Color and Dual-Injection Soft Lures: OEM Manufacturing Guide

> Laminate vs two-tone, tooling, boundary tolerance and the real cost of dual-color soft lures.

Source: https://luressource.com/opportunities/dual-color-dual-injection-soft-lures-oem/

Direct answer. Dual-color soft plastics are not simply one lure with two colors. Laminate, two-tone injection, core-shot and multi-stage assembly have different tooling requirements, production cost and tolerances. The color boundary will vary slightly piece to piece, so the buyer and factory should agree acceptable variation before production - and dual color usually costs more than single color. Sources (2). 1) UN Comtrade — China export statistics under HS 9507, 2023-2024 (retrieved from the official API) — https://comtradeplus.un.org/ 2) Harmonized System heading 9507 (rods, hooks, reels, lures) — US HTS lookup — https://hts.usitc.gov/ Dual-color soft lures can create a strong visual difference on the retail wall. A dark back with a light belly. A bright tail with a natural body. A laminated bait with two contrasting colors. These designs can help fishing brands build recognizable products. But from a manufacturing perspective, dual-color soft plastics are not simply "one lure with two colors." They can require different tooling, process control and production time. For OEM buyers, understanding the production method helps avoid unrealistic quotations and sample expectations. What Is a Dual-Color Soft Lure? The term can refer to several different constructions. Laminate Two colors form distinct layers. For example: Green pumpkin back Pearl white belly This is common in shad and swimbait patterns. Two-tone injection Different sections of the lure are produced in different colors. For example: Natural body Chartreuse tail Core-shot or internal color One material or color is visually contained within another. Multi-stage assembly Different sections may be produced separately and combined. These methods do not have the same production cost. A buyer should show the desired result rather than simply request "dual color." Why Tooling Matters Some molds are designed specifically for multi-color production. Others are not. Trying to force a two-color effect into tooling designed for single-color production may lead to: poor separation; inconsistent transition lines; flash; incomplete fill; longer cycle time. If two-color construction is important to the product, discuss it during mold design. This is especially important for proprietary OEM projects. Color Boundary Consistency Retail buyers often expect every lure to look identical. In practice, some multi-color soft lures naturally show variation. The boundary between colors may shift slightly. That can happen because of: material flow; injection timing; temperature; viscosity; mold geometry. Before production, the buyer and factory should agree on what variation is acceptable. Otherwise, perfectly functional lures may be rejected simply because the color line is not identical piece to piece. Dual Color Usually Increases Cost Why? Because the factory may need: multiple material batches; additional injection steps; slower production cycles; more setup time; additional inspection. If a basic lure is produced in one color, output can be relatively fast. Adding a second color usually increases complexity. Therefore, buyers should not expect a dual-color bait to cost exactly the same as a single-color version. Color Changeovers Matter Suppose a buyer orders: 10 dual-color combinations × 1,000 pcs each. That may be much less efficient than: 2 dual-color combinations × 5,000 pcs each. Every additional combination creates another production setup. This is why multi-color products often benefit from a tighter launch assortment. Use Physical Samples for Approval Dual-color designs are difficult to approve only through digital renderings. A screen does not accurately show: transparency; pearl; glitter; light transmission; transition between layers. The most reliable approval method is a real molded sample. If repeat consistency is important, retain the approved sample as the production reference. Think About Retail Visibility The second color should have a commercial purpose. It may: imitate forage; improve visibility; create contrast; identify a product family; produce a regional specialty color. Do not add manufacturing complexity only because two colors look more advanced. If the retail customer does not value the difference, the added cost may not produce additional margin. Dual-Color RFQ Example Product: 4-inch paddle tail Construction: Laminated Back: Transparent green pumpkin with black flake Belly: Pearl white Material: PVC Salt: Light Scent: Shrimp Quantity: 20,000 pcs Pack Count: 5 Packaging: Printed zipper bag Attach: side-view artwork; physical color sample if available; acceptable color-boundary reference. This gives the supplier a much clearer target. Quality Checks For dual-color production, inspection should include: correct color pairing; consistent orientation; acceptable boundary line; full mold fill; no excessive bleeding; no major deformation; correct glitter distribution. For action-based lures, swimming performance should still be checked. Appearance should never become the only QC standard. Final Takeaway Dual-color soft plastics can create strong shelf differentiation, but they need to be designed as a manufacturing process, not only as artwork. The earlier the factory understands the intended color construction, the easier it becomes to quote tooling, production and tolerances accurately. Cheery Supply Chain Buyer CTA Developing a laminated or dual-color soft bait? Send us the lure shape, target color layout, quantity and reference images. We can help structure the manufacturing specification before tooling or sampling begins. Related reading Custom soft plastic lure manufacturing in China Custom Paddle Tail Swimbaits: OEM Specifications Buyers Should Send Saltwater Soft Plastic Lure Manufacturing: Materials, Rigging and Packaging