# Tackle Order Inspection | What Is Checked Before Shipment

> What is measured on a fishing tackle order before shipment, which documents arrive with the goods, and what happens when the inspection fails.

Source: https://luressource.com/how-it-works/inspection/

Direct answer. Inspection measures the order against the approved physical sample, not against a description. What cannot be measured against a sample cannot be inspected. Key facts. 1) An inspection measures the production run against the approved physical sample. 2) Work is checked in the sequence that catches the most expensive problems first. 3) The inspection samples units rather than approving one. 4) Production stops before shipment, and the defect is documented against the approved sample rather than described in general terms. 5) The report is yours whether or not the shipment proceeds. What gets inspected, and what you receive Direct answer Inspection measures the order against the approved physical sample, not against a description. What cannot be measured against a sample cannot be inspected. Key facts An inspection measures the production run against the approved physical sample. Work is checked in the sequence that catches the most expensive problems first. The inspection samples units rather than approving one. Production stops before shipment, and the defect is documented against the approved sample rather than described in general terms. The report is yours whether or not the shipment proceeds. An inspection measures the production run against the approved physical sample. That single sentence decides what is inspectable and what is not: anything the sample fixes can be measured, and anything left to a description cannot. This is why the sample stage matters more than the quotation, and why the cheapest part of a programme is the one that prevents the most expensive failure. What is measured, and how The inspection items on a fishing tackle order, and the difference between measuring one and judging one. Item Measured against Not acceptable as a method Colourway and finish A measured standard, such as a colour chip or a spectrophotometer reading against the approved sample Judging by eye against a photograph or a memory of the sample Hardware The named hook, ring and split-ring specification, matched by part and by gauge "Equivalent hardware" without a named part number Lure weight and length Sampled against a stated tolerance, in grams and millimetres A single unit weighed and assumed representative Buoyancy, hard lures Behaviour against the approved sample: floating, suspending or sinking, and the rate A description of what it is supposed to do Salt-spray / corrosion A defined test duration for saltwater programmes, with the hardware and plating named Assuming a freshwater part is adequate for saltwater Rod action The stated action and power, checked against the approved sample blank A written action label with no sample to compare Guide alignment and reel-seat fit Spine alignment, guide spacing, and a reel fitted to the seat Visual checks at a distance What an inspection measures against Approved sample colour, hardware, weight signed off before tooling runs defines Production run sampled units, not one unit measured against the sample measures Report clears — balance releases, goods ship Report fails — shipment stops, rework or credit, balance held The report is yours either way. That is what makes it useful in a claim rather than only in a release. Nothing downstream of the sample can be inspected against a verbal description. Inspection is a comparison, not an opinion. The sample is the standard, and the report is the evidence. What is inspected before shipment, in order Work is checked in the sequence that catches the most expensive problems first. Dimensions and weight come first, because a mould that is out of tolerance is not fixable by sorting. Hardware and assembly come next, since a wrong hook is a rework rather than a remake. Colour and finish follow, because they are the most visible to a buyer but the least structural. Salt-spray or corrosion testing runs on saltwater programmes and takes the longest, so it is started earliest where the schedule allows. Rod programmes add action, guide alignment and reel-seat fit as a separate pass. The inspection samples units rather than approving one. A single good unit out of a run says very little, and the failure that matters most on a tackle order is not a bad unit — it is a run that is uniformly slightly out, in a colourway or a weight that is close enough to pass a quick look. Sampling is what surfaces a drift before it becomes a shipment. What happens if the goods fail inspection Production stops before shipment, and the defect is documented against the approved sample rather than described in general terms. The factory then reworks or credits, and the balance stays held until the issue is resolved. Because the balance is the leverage, a failed inspection has a consequence the factory can feel, which is the difference between an inspection that changes behaviour and one that only produces a document. The report is yours whether or not the shipment proceeds. That matters more than it sounds in a dispute: a third-party record of what was measured at the factory, dated and taken before the goods moved, is evidence in a way that a later photograph of a defective item is not. What documents arrive with the goods Four documents matter on a tackle order, and each one does a different job. The proforma invoice fixes the commercial terms before production: unit price, quantity, price basis, deposit percentage, and the delivery window. The commercial invoice repeats those terms as the actual shipment and is the document customs reads. The packing list states cartons, dimensions, gross and net weight — the numbers a forwarder needs, and the numbers that decide whether a container is full. The bill of lading is the carrier's receipt and the document that releases the balance on the usual terms. Two failures are common and cheap to avoid. A quotation that never becomes a proforma invoice leaves the price basis unstated, and a price basis unstated is a price that cannot be compared with the next one. And a packing list that is filled in after the container is loaded cannot be used to fix a carton count, which is the discrepancy that turns into a claim. What gets inspected on a tackle order? Inspection measures against the approved sample, not against a description. This is the list we work to for tackle. Check How it is measured The defect it catches Colourway Against the approved physical or measured standard, with the agreed tolerance Colour drift between batches — the most common complaint on repeat orders Hardware Hook, split ring and swivel matched to the named specification: model, wire gauge, finish Silent substitution with a cheaper equivalent Lure weight and length Sampled across the run against tolerance Mould wear and shot-weight variance Buoyancy behaviour Float, suspend or sink checked against the approved sample A hard lure that no longer suspends after a mould or weighting change Corrosion Salt-spray testing for saltwater programmes Freshwater-spec hardware sold into a saltwater market Rod action and hardware Action, guide alignment, reel-seat fit, grip dimensions Production rods that do not match the showroom sample Packaging and marks Packaging format, labelling, barcodes, carton marks Retail rejection at the destination What documents do you receive? Quotation — price basis, MOQ, lead time, tooling and validity, in writing. Sample approval record — a signed approval referencing the physical standard the production run will be measured against. Proforma invoice and order confirmation — the commercial terms that govern the order. Inspection report — issued to you whether or not the shipment proceeds. Shipping documents — commercial invoice, packing list and bill of lading or telex release. Certificates and test reports — where the destination market requires them, requested from the factory rather than accepted as a statement. Where this sits in the process This page is one topic out of the verification standard. The overview is How sourcing works , and the other topics on this page are listed there. Where to next Product catalogue Sample listings with price per unit Verified directory Factories that passed 4 verification gates How sourcing works Six steps, timing, failure modes Price benchmark Reference bands and MOQ tiers Updated 2026-09-18 Scope Fishing tackle sourcing Sources 2 cited Was this page useful? Yes, useful Not really Sources Commercial defaults described here reflect standard Chinese export manufacturing practice; the terms that govern an order are those in the quotation and proforma invoice Inspection and verification method follows our published four-gate standard (see /verification/)